Lexicon MX300 - The MX-Edit Program Editor

THE MX-EDIT
TM
PROGRAM EDITOR
The MX-Edit Program Editor lets you quickly and easily view, compare and edit any
program stored in the MX300, or programs saved to your computer.
MX-Edit gives you all the same control and functionality as the MX300 front panel,
with the exception of Input control and System functions.
All changes that you make in the active Program Editor window are reflected in real-
time on the MX300. MX-Edit and the MX300 are fully interactive, so any changes made
on the MX300’s front panel are reflected in real-time in the MX-Edit Program Editor
window as well.
When you open a program, the MX-Edit Program Editor is updated with the selected
program’s name in the Program Name field, and you're prompted to save any previous
edits. The settings of the loaded program are reflected in the Parameter knobs and but-
tons, and are loaded into the MX300 hardware.
SIGNAL ROUTING OPTIONS
To change the MX300’s Routing, left click on the Routing button in the Input/
Routing control area. A list of the MX300’s Routing options appears, with a check
mark next to the currently selected routing. Highlight an item in the list and left click
to select and load it. A routing diagram appears next to the Routing button, and the
routing name is shown in the button.
REVERB/EFFECT SELECTION BUTTONS
To change a reverb or effect in Processor 1 or Processor 2, left click on the Reverb/
Effect Select button in Effect 1 or Effect 2 control area. A list of the MX300’s reverbs
and effects appears, with a check mark next to the currently selected reverb or effect.
Highlight an item in the list and left click to select and load it. Notice that the reverb
37
The MX-Edit
TM
Editor/Librarian - Windows
®
and Mac
®
MX300