If a non-delay effect is loaded in the processor, the Tempo button is dimmed and
inactive.
BYPASS
To engage the Bypass button (and turn off the selected effect), place the mouse cur-
sor over the Bypass button, and left-click to bypass that processor.
PROGRAM NAME
To create or change a program’s name, simply left click once anywhere in the Program
Name field. The program name will be highlighted; type the new name into the text
box.
SAVING A PROGRAM
If you make any changes to a program, an asterisk (*) will appear next to the program
name in the Title Bar when the Program Editor is active. The LED on the Store but-
ton on the MX300’s front panel also illuminates, indicating a change from the loaded
program.
To save a program to disk, click File and select Save or Save As, and enter a file
name. By default, programs are saved to your computer in the My Documents
folder; to choose a different location, simply navigate to a different folder or create a
new folder in which to save your MX300 program files. (For example, C:\Documents
and Settings\username\My Documents\MX300 Presets). Click the Save
button to complete the process.
You can also save a program simply by closing the Program Editor window. If any
changes have been made to the loaded program, a dialog box appears, asking if you
want to save your changes. Click Yes to save the changes, No to close without saving,
or Cancel to return to the Program Editor window. If you choose this method to save
your changes, the current program will be over-written; to save the program as a new
file with a different name (and keep the loaded program’s settings intact), click File
then Save As.
MX300 programs are given the file extension .MX300p, and they can be copied, moved,
attached to emails – anything you can do with a standard document or file. These
files should, however, only be opened by MX-Edit Editor/Librarian software to prevent
corruption.
STORING A PROGRAM
To store a program into one of the User program locations in the MX-Edit Library
(and the corresponding location in the MX300’s physical memory), open the program
you wish to store. With the Program Editor window active, click Device, then Store
Program. The Store to Device dialog appears, allowing you to choose the User
program location and program name to store with it. Be aware that storing a program
in this manner will over-write the program previously stored in that location, both in
the MX-Edit Library and the MX300 itself. Click Save to store to the selected User pro-
gram location. To cancel the operation, click Cancel, or close the Store to Device
dialog box.
39
The MX-Edit
TM
Editor/Librarian - Windows
®
and Mac
®
MX300
To Next Page
Loading...
