11
Connecting the MX300
the System menu (described on page 30). This setup is ideal for use with programs
using Cascade, Parallel, and Stereo routings (see page 16 for more information about
routings).
Studio – Digital Setup
S/PDIF Out
S/PDIF In
To
USB
Port
This setup is ideal if you are using the MX300 as a hardware plug-in in a digital record-
ing system. This setup requires that you are using an I/O device with S/PDIF In/Out, or
a digital mixer with S/PDIF I/O option. The Input Source must be set to Digital, and
the Clock Source should be set to Digital in the System menu (described on pages
30-31).
MX300
To Next Page
Loading...
