Lexicon MX300 - Mixer - Dual Mono In;Stereo out Setup; Mixer - Dual Mono In;Out Setup

signal. The Input Source must be set to Anlg Mono L in the System menu
(described on page 30). This setup is ideal for programs using Cascade, Parallel, and
Stereo routings (see page 16 for more information about routings).
Mixer - Dual Mono In/Stereo Out Setup
Aux
Send 1
Aux
Return 1
Aux
Send 2
Aux
Return 2
This setup lets the MX300 act as two effects processors. Separate input sources are fed
into the MX300 and processed independently with different effects, then output as a
mixed stereo signal. The Input Source must be set to Anlg Stereo in the System
menu (described on page 30). This setup is ideal for programs using the Mono Split
routing (see page 16 for more information about routings).
Mixer - Dual Mono In/Out Setup
Aux
Send 1
Aux
Return 1
Aux
Send 2
Aux
Return 2
This setup lets the MX300 act as two effects processors. Separate input sources are
fed into the MX300 and processed independently with different effects, then output
as separate mono signals. The Input Source must be set to Anlg Stereo in the
System menu (described on page 30). This setup is ideal for programs using the Mono
Split routing (see page 16 for more information about routings).
Connecting the MX300
9
MX300