MX300
51
SPECIFICATIONS
Analog Audio Inputs
Connectors two XLR and two ¼" TRS balanced or unbalanced
Impedance 50k Ohms bal., 25k Ohms unbal.
Input Level +4 dBu nominal, +24 dBu maximum
A/D Conversion 24-bit, 48kHz or 44.1kHz, 128 x oversampling
Analog Audio Outputs
Connectors two XLR and two ¼" TRS balanced or unbalanced
Impedance 2k Ohms bal., 1k Ohms unbal.
Output Level +4 dBu or –10 dBV nominal (software adjustable), 24 dBu maximum
D/A Conversion 24-bit, 48kHz or 44.1kHz, 128 x oversampling
Analog Audio Performance (Effects Bypassed)
Frequency Response 10 Hz – 20kHz +0 dB/–0.5 dB
THD+N <0.0019% 10Hz – 20kHz
Dynamic Range >109 dB (A-weighted) A/A
Crosstalk typical < –80 dB 20Hz – 20kHz
Digital Input and Output
Connectors RCA phono (S/PDIF)
Format S/PDIF 24-bit
Sample Rate 44.1 or 48kHz
Frequency Response 10Hz to 22kHz ±0.5 dB @ 48kHz
Control Interface
USB USB 1.1 for MX-EDIT™ Editor/Librarian and VST™/Audio Units plug-ins
MIDI In/Out 5-pin DIN
Foot Pedal ¼" TRS phone jack
General
Size (W/H/D) 19" x 1.75" x 7.25"*/6.375"
(483 x 44 x /185mm*/162 mm)
Weight 5.8 lbs (2.6 kg)
Operating Voltage: 100-120 VAC 50/60 Hz -EU 220-240 VAC 56/60 Hz
Power Requirements 18 Watts
The MX300 is manufactured to operate from a specific supply voltage. There are two different models, one
which accepts 100V-120V, and another which accepts 220V-240V mains. All units sold in North America are for
100V-120V only. You cannot operate a 100V-120V MX unit using 220V-240V power. The supply voltage is marked
on the back of the unit.
Model Operating Voltage Power Requirements
MX300 100-120 VAC 50/60 Hz 18 Watts
MX300-EU 220-240 VAC 56/60 Hz 18 Watts
* Including knobs.
Specifications
To Next Page
Loading...
