Using the MX300
17
EDITING EFFECT MIX/ROUTING
1. While on the Program Screen, press the Page/Select knob. This will enter the
Program Edit menus.
2. Turn the Page/Select knob until the Edit Mix/Routing menu is highlighted.
3. Press the Page/Select knob to enter the Edit Mix/Routing menu.
4. Turn Knob A to select different effect routings for the program. Use Knob B
and Knob C (when available) to adjust the wet/dry mix for each effect.
Note: For programs using routing 5 - Stereo, there is only one effect available so Effect
2 Mix will not be available.
When finished, store the changes to the program if you would like them to be recalled.
TEMPO BUTTON
The Tempo button is used for quickly setting the tempo parameter in delay effects.
In some cases there may be two delays set up in a program using two effects. The
Tempo button will flash at the rate of the delay which is highlighted in the Main
Display. To set the tempo of the second delay, turn the Page/Select knob until the
second delay is highlighted in the Main Display. The Tempo button can now set
the delay time for this delay. Although the Store button doesn't light when changing
tempo settings with the Tempo button, changes to tempo must be saved to the pro-
gram if the changes are to be recalled later.
BYPASS BUTTONS
The MX300 is equipped with two bypass buttons: Effect Bypass (located near the
Page/Select knob and Program Bypass (located near the Program/Load
knob). Effect Bypass only bypasses the selected effect in the Main Display. This
lets you bypass effects individually in programs. Effect Bypass can also be saved
with the program. Program Bypass is a global bypass control for MX300. All
effects in all configurations are bypassed when Program Bypass is engaged.
There are four different options Bypass can be set to function as:
1. Dry - Bypasses dry signal around an effect or program.
2. Mute - Mutes all input and output audio.
3. Input Dry - Outputs signal with no processing or effects.
4. Input Mute - Mutes the input only.
The Bypass options can be selected in the System Menu and will affect both Effect
Bypass and Program Bypass.
MX300
To Next Page
Loading...
