Lexmark CS310 Series User Manual

Replace [color] cartridge, printer region mismatch [42.xy]
Install a toner cartridge that matches the region number of the printer. x indicates the value of the printer region. y
indicates the value of the cartridge region. x and y can have the following values:
Region number Region
0Global
1 United States, Canada
2 European Union (EU), European Economic Area (EEA), Switzerland
8 Rest of the world
9Invalid
Notes:
• The x and y values represent .xy in the error code that appears on the printer control panel.
• The x and y values must match for printing to continue.
Replace defective [type] imaging kit [31.xy]
Note: The type can be a black imaging kit, or a black and color imaging kit.
Replace the defective imaging kit to clear the message and continue printing. For more information, see the instruction
sheet that came with the supply.
Note: If you do not have a replacement imaging kit, then see the “Ordering supplies” section of the User’s Guide or
visit
www.lexmark.com.
Replace maintenance kit, 0 estimated pages remain [80.xy]
Contact customer support at http://support.lexmark.com or your service representative, and then report the message.
The printer is scheduled for maintenance.
Replace missing [color] cartridge [31.xy]
Install the indicated toner cartridge to clear the message. For more information, see the “Replacing supplies” section
of the User’s Guide.
Replace missing [type] imaging kit [31.xy]
Note: The type can be a black imaging kit, or a black and color imaging kit.
Install the indicated imaging kit to clear the message. For more information, see the “Replacing supplies” section of
the User’s Guide.
Replace missing waste toner bottle [82.xy]
Install the missing waste toner bottle to clear the message. For more information, see the instruction sheet that came
with the supply.
Troubleshooting 145

Lexmark CS310 Series Specifications

General

Brand	Lexmark
Model	CS310 Series
Category	Printer
Language	English