10 Gently shake the yellow, cyan, magenta, and black developer units side‑to‑side.
11 Remove the red packing strip and the attached fabric from the developer units.
12 Gently insert the yellow, cyan, magenta, and black developer units.
Note: Make sure each developer unit is inserted into the matching color slot.
13 Remove the red packing strip from the imaging kit.
Warning—Potential Damage: Do not touch the shiny photoconductor drum under the imaging kit. Doing
so may
aect
the quality of future print jobs.
Maintaining the printer 217
To Next Page
Loading...
