68
What this light sequence means when you press the
operator panel button with a double-button press from
the special function menu:
The toner is low and the toner alarm is set to on.
What you can do:
• Press the operator panel button with a brief button
press to resume printing.
• Replace the print cartridge.
• Cancel the job. Push the operator panel button until
all the lights come on to reset the printer.
What this light sequence means when you press the
operator panel button with a double-button press from
the special function menu:
The printer has run out of memory while formatting a page
and is forced to reduce the resolution to 300 dpi before
printing it.
What you can do:
• Push the operator panel button to resume printing.
• Install additional memory.
• Cancel the job. Push the operator panel button until
all the lights come on to reset the printer.
To Next Page
Loading...
