Lexmark MS312 - Using MS312; Using the Printer Control Panel

April 23, 2015
• Updated the 97y error code table and created “Network port error service check” on page 145 for the
97y error codes.
• Updated the 98y error code table and created “Option communication error service check” on page 146
for the 98y error codes.
• Updated the 99y error code table and created “Option communication error service check” on page 146
for the 99y error codes.
April 6, 2015
• 40X8303 FRU was renamed to ‘250-sheet tray insert (standard tray only)’
• 40X8260 FRU was renamed to ‘ACM assembly (standard tray only)’
• 40X8262 FRU was renamed to ‘ACM assembly (option tray only)’
• 40X8305 FRU was renamed to ‘250-sheet tray insert (option tray only)’
December 4, 2014
• Updated the LSU removal procedure.
October 17, 2014
• Updated the ACM clutch removal procedure.
• Frame parts catalog assembly table—Removed the insulated displacement connectors (IDC) from 40X8265.
October 9, 2014
• Updated the illustration of Electronics 2 parts catalog assembly to show the correct toner cartridge smart
chip contact.
September 8, 2014
• Changed part number 40X8296 to 41X0547.
August 15, 2014
Updated the following service checks:
• Toner cartridge smart chip contact service check
• Cartridge gearbox service check
• Toner starvation service check
• LSU service check
• Tray 1 jam service check
July 2, 2014
• Parts catalog frame assembly illustration—Removed the spring from 40X8295, and removed the cable from
40X8083.
June 4, 2014
• Parts catalog, Electronics 1 assembly—Changed LSU part number from 40X8081 to 40X8082.
4514-330
Change history
26