Lexmark MS317 - Unsupported Toner Cartridge Service Check; Printer;Cartridge Mismatch Service Check

Action Yes No
Step 3
Check the toner cartridge smart chip contact for damaged pins.
Is it free of damage?
Replace the
controller board. See
“Controller board
removal” on
page 223.
Replace the toner
cartridge smart chip
contact. See
“Toner
cartridge smart chip
contact removal” on
page 225.
Unsupported toner cartridge service check
Action Yes No
Step 1
a Check if the toner cartridge is a supported and genuine
Lexmark supply. If not, then replace it.
b Make sure that the toner cartridge is properly installed.
c Check the toner cartridge, toner cartridge button, and cartridge
plunger for damage. Replace if necessary.
d Make sure that the latest firmware is installed.
Does the problem remain?
Go to step 2. The problem is
solved.
Step 2
If this error occurred after replacing the controller board, then
restore the printer configuration. See
“Restoring the printer
configuration
after replacing the controller board” on page
185.
Does the problem remain?
Contact the next
level of support.
The problem is
solved.
Printer/cartridge mismatch service check
Action Yes No
Step 1
a Make sure that the printer and toner cartridge belong to the
same country or region. If the printer comes from a dierent
country or region, then contact the next level of support to reset
the printer.
b Check if the toner cartridge is a supported and genuine
Lexmark supply. If not, then replace it.
c Make sure that the latest firmware is installed.
Does the problem remain?
Go to step 2. The problem is
solved.
4514-330
Diagnostics and troubleshooting
116