Available options:
• O
• On
Safe Mode
The settings for this menu item are On and O (default). When enabled, Safe Mode lets the printer operate in
a special limited mode in which it attempts to continue oering as much functionality as possible despite known
issues.
Available options:
• On
•
O
Demo Mode
Demo mode is often used in retail environments to highlight printer capabilities. The printer stores
demonstration files in the resident demo file of the base RIP firmware and in any supported optional memory
devices.
When this mode is activated, the printer ignores all print jobs sent to it other than the demo
file
selected by the
user. Each demo
file
consists of one or more printed pages.
Available options:
• Activate—The printer boots into Demo mode after each power cycle.
• Deactivate—The printer boots into normal mode.
To print a demo file:
1 Activate Demo mode, and then POR the printer.
2 Select a demo
file
from the displayed list, and then press OK to print.
Energy Conserve
This aects the values that appear in the Power saver setting in General settings menu.
Available options:
• O—The Power saver menu displays a Disabled setting. When selected, it disables the Power saver feature.
• On—Disabled does not appear in the Power saver menu. The user cannot disable the Power saver feature.
Wipe All Settings
This makes any sensitive information that may exist on the volatile or non-volatile storage of the device
completely indecipherable. When selected, the printer performs a non‑critical NVRAM reset and then reboots.
Font Density
This creates microscopic holes in all black text. The holes save toner by reducing overlapping toner.
Available options: 1 to 5
4514-330
Service menus
178
To Next Page
Loading...
