Error code Description Action
111.00 Pel clock check failed. Go to
“Laser scanning unit (LSU) service
check” on page 125.
111.01 Downlevel ASIC detected.
111.20 Mirror motor lock is asserted before the motor is
turned on.
Note: This error is applicable only to printer
models installed with a polygon LSU.
111.30 Failed to identify the printhead.
Note: This error is applicable only to printer
models installed with a polygon LSU.
111.31 Printhead never delivered HSYNCs.
111.32 Printhead lost HSYNCs.
111.33 Printhead lost HSYNCs during servo.
Note: This error is applicable only to printer
models installed with a polygon LSU.
111.34 Mirror motor lost lock.
Note: This is applicable only to printer models
installed with a polygon LSU.
Go to
“Laser scanning unit (LSU) service
check” on page 125.
111.35 Mirror motor was never locked first.
Note: This error is applicable only to printer
models installed with a polygon LSU.
111.36 Mirror motor lock was never stabilized.
Note: This error is applicable only to printer
models installed with a polygon LSU.
111.37 Page reached input sensor but the mirror motor
was not locked.
Note: This error is applicable only to printer
models installed with a polygon LSU.
111.38 Page reached input sensor but the printhead
startup was not completed.
Note: This error is applicable only to printer
models installed with a polygon LSU.
4514-330
Diagnostics and troubleshooting
123
To Next Page
Loading...
