Lexmark MS510 Series - Understanding Control Panel and Menus (MS610 de)

Understanding the control panel and menus (MS610de)
Using the printer control panel
1
2
3
4
5
6
7
Use the To
1 Display View the printer status and messages.
Set up and operate the printer.
2 Home button Go to the home screen.
3 Keypad Enter numbers, letters, or symbols.
4 Sleep button Enable Sleep mode or Hibernate mode.
The following actions wake the printer from Sleep mode:
• Touching the screen
• Pressing any hard button
• Opening a tray or the front door
• Sending a print job from the computer
• Performing a power‑on reset using the main power switch
• Attaching a device to a USB port
5 Stop or cancel button Stop all printer activities.
6 Indicator light Check the status of the printer.
7 USB port Connect a USB Bluetooth adapter or a flash drive to the printer.
Note: Only the front USB port supports flash drives.
Understanding the colors of the indicator and Sleep button lights
The colors of the indicator and Sleep button lights on the printer control panel signify a certain printer status or condition.
Indicator light color and its corresponding printer status
Indicator light Printer status
Off The printer is off or in Hibernate mode.
Blinking green The printer is warming up, processing data, or printing.
4514-630, -635, -636
Service menus
119