Lexmark MS622 Service Manual

Installation notes:
• To test if the spring and actuator are properly installed, press the actuator (A). The lock (B) should move up.
B
A
• Make sure that the tab (C) at the back of the cartridge guide is properly installed as shown.
Cartridge barrel shutter sensor kit removal
1 Remove the top cover. See “Top cover removal” on page 238.
2 Remove the right cover. See “Right cover removal” on page 186.
3 Disconnect the cable JCVR1 from the controller board.
4600-830, -835, -895
Parts removal
198

Lexmark MS622 Specifications

General

Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 175, 000 pages
Print Technology	Laser
Input Capacity	Up to 650 sheets
Output Capacity	250 pages
Processor Speed	1 GHz
Memory	512 MB
Connectivity	USB, Ethernet, Optional Wireless
Recommended Monthly Page Volume	2, 000 - 20, 000 pages
Media Sizes Supported	A4, A5, A6, Legal, Letter, Executive
Supported Operating Systems	Windows, macOS, Linux
Duplex Printing	Standard