Use To
Show Supply Estimates
Show estimates
Do not show estimates
Get an estimate on the status of supplies.
Notes:
• Show estimates displays the estimated supply status in pages
on the control panel, printer Web page, and on the Menu
Settings and the Device Statistics reports.
• Do not show estimates hides the estimated supply status in
any location.
Eco-Mode
Off
Energy
Energy/Paper
Paper
Minimize the use of energy, paper, or specialty media.
Notes:
• For touch‑screen printer models, touch Eco‑Mode, and then
select from the options.
• Off is the factory default setting. Off resets the printer to its
factory default settings.
• Energy minimizes the power used by the printer.
Performance may be affected, but print quality is not.
• Energy/Paper minimizes the use of power and of paper and
specialty media.
• Paper minimizes the amount of paper and specialty media
needed for a print job. Performance may be affected, but
print quality is not.
Quiet Mode
Off
On
Reduce the amount of noise produced by the printer.
Notes:
• For touch‑screen printer models, touch Quiet Mode, and
then select from the options.
• Off is the factory default setting. This setting supports the
performance specifications for your printer.
• On configures the printer to produce as little noise as
possible. This setting is best suited for printing text and line
art.
• Selecting Photo from the printer driver may disable Quiet
mode and provide better print quality and full‑speed
printing.
Run Initial setup
Yes
No
Instruct the printer to run the setup wizard.
Notes:
• Yes is the factory default setting.
• After completing the setup wizard by selecting Done at the
Country select screen, the default becomes No.
Understanding the printer menus 216
To Next Page
Loading...
