What does 'Disk must be formatted for use in this device' mean on Lexmark All in One Printer and how to fix it?
If your Lexmark All in One Printer displays the message 'Disk must be formatted for use in this device', select 'Format disk' from the printer control panel to format the printer's hard disk and clear the message.
What causes 'Error reading USB drive. Remove USB' on Lexmark All in One Printer?
The 'Error reading USB drive. Remove USB' message on your Lexmark All in One Printer indicates that an unsupported USB device has been inserted. Remove the current USB device and replace it with a compatible one.
What to do if my Lexmark All in One Printer says 'Insert hole punch box'?
If your Lexmark All in One Printer displays the message 'Insert hole punch box', insert the hole punch box into the finisher, and then select 'Continue' on the printer control panel to clear the message. For non-touch-screen printer models, press to confirm.
What to do if my Lexmark All in One Printer says 'Insert staple cartridge'?
If your Lexmark All in One Printer displays the message 'Insert staple cartridge', you can try the following: * Insert a staple cartridge. * Alternatively, select 'Continue' to clear the message and print without using the staple finisher. For non-touch-screen printer models, press to confirm.
What to do if my Lexmark All in One Printer says 'Load staples'?
If your Lexmark All in One Printer displays the message 'Load staples', you can try the following: * Replace or insert the specified staple cartridge in the finisher. * Select 'Continue' to clear the message and continue printing. * Cancel the print job.
What to do if my Lexmark All in One Printer says 'Too many bins attached'?
If your Lexmark All in One Printer displays the message 'Too many bins attached', follow these steps: 1. Turn off the printer. 2. Unplug the power cord from the electrical outlet. 3. Remove the extra bins. 4. Connect the power cord to a properly grounded electrical outlet. 5. Turn the printer back on.
General| Print Technology | Monochrome Laser |
|---|---|
| Print Resolution | 1200 x 1200 dpi |
| Monthly Duty Cycle | Up to 300, 000 pages |
| Processor Speed | 800 MHz |
| Operating System Compatibility | Windows, Mac OS, Linux |
| Print Speed | Up to 55 ppm |
| Standard Input Capacity | 650 sheets |
| Maximum Input Capacity | 4400 pages |
| Duplex Printing | Standard |
| Connectivity | USB, Ethernet |
| Print Languages | PCL 5e, PCL 6, PostScript 3 |
| Maximum Paper Size | A4 |
Provides a table to find information on printer setup, usage, and support resources.
Details on installing memory cards, fonts, firmware cards, hard disks, and solution ports.
Steps for installing hardware options like bases, trays, and finishers.
Step-by-step guide for installing optional paper trays, including caster base.
Instructions for connecting USB or Ethernet cables to the printer.
Steps to install and configure the printer software and drivers.
Information on preparing and setting up the printer on Ethernet or wireless networks.
Explanation of the printer control panel buttons and their functions.
Guides on selecting, handling, and loading paper and specialty media.
Instructions for loading paper into the 250- or 550-sheet trays.
Procedure for opening and preparing the multipurpose feeder for paper loading.
Guides on printing documents, forms, and information pages.
Methods to adjust toner darkness via the printer's web interface or control panel.
Steps to print documents directly from a USB flash drive or mobile device.
How to print font lists, directory lists, and cancel print jobs.
How to interact with the printer control panel remotely via a web browser.
Procedure to print network configuration and verify connection status.
Instructions for replacing consumables like toner and imaging units.
How to interpret jam messages and identify jam locations for clearing.
Explanation of common printer messages and how to resolve them.
Troubleshooting steps for paper source and loading configuration errors.
Steps to troubleshoot and resolve tray connection errors.
Steps to diagnose and resolve common printer issues.
Troubleshooting steps for when the printer's display screen is blank.
To Next Page
