Paper handling
100
Corner bucklers
Trays 2 and 3 (and the optional 500-sheet tray 4) use a corner buckler system to pick
paper from the trays. To avoid paper jams or skewed print, make sure all paper loaded in
the 500-sheet trays fits securely under the corner bucklers.
The following figure illustrates the location of the corner bucklers in the 500-sheet trays.
Tray linking
If you load the same paper size and type in more than one tray, the printer automatically
links the trays: when one tray is empty, paper feeds from the next linked tray. By linking the
trays on the standard Optra W810 printer model, you can effectively create a single paper
source that holds up to 1250 sheets. If you installed an optional drawer, you can also link
that tray for a total capacity of 1750 sheets or 3750 sheets, depending on the capacity of
the optional drawer.
Corner buckler
To Next Page
Loading...
