Lexmark Optra W810 - Printing a Font Sample List

Understanding fonts
163
Printing a font sample list
To print samples of all the fonts currently available for your printer:
1
Make sure the printer power is on and either
Ready
or
Power Saver
is
displayed on the operator panel.
2
Press
Menu>
or
<Menu
to enter the menus.
3
Continue to press and release
Menu>
until you see
Utilities Menu
.
4
Press
Select
.
5
Press
Menu>
until you see
Print Fonts
.
6
Press
Select
.
7
Press
Menu>
or
<Menu
until you see either
PCL Fonts
or
PS Fonts
on the
second line of the operator panel.
–
Select
PCL Fonts
to print a listing of the fonts available to the PCL emulator.
–
Select
PS Fonts
to print a listing of the fonts available to the PostScript 3 emu-
lator. This choice only appears when the PostScript printer language is avail-
able in the printer.
8
Press
Select
.
The message
Printing Font List
is displayed until the page prints. The printer
returns to the
Ready
state after the font sample list prints.