Paper handling
95
Paper sources
All Optra W810 models have three standard paper sources: a 250-sheet paper tray
(tray 1) and two 500-sheet paper trays (trays 2 and 3). You can load paper, transparen-
cies, card stock, and paper labels in tray 1. Trays 2 and 3 support only paper.
To increase the printer’s paper capacity, you can add either an optional 500-sheet drawer,
which is identical to trays 2 and 3, or an optional 2500-sheet drawer, which is configured
to hold either A4 or letter size paper, depending on your geography.
Paper path
It is helpful to understand the path the paper follows through the printer, especially when
you are printing on certain media or clearing paper jams. The printer picks the paper from
the right side of the tray, carries it up the right side of the printer, then stacks it face down
in the output bin.
The figure on page 96 illustrates the paper path for an Optra W810 printer with an
optional 2500-sheet drawer and duplex option attached.
To Next Page
Loading...
