Lexmark Optra W810 - Chapter 8: Managing Memory; Printer Memory (SDRAM)

Managing memory
164
8
Managing memory
On the Optra W810, the memory required to print a particular job is a complex function of
the types of memory available, the printer settings selected, and the composition of the
print job itself. The amount of printer memory installed and the attributes of the processor
also affect print speed and performance.
Printer memory (SDRAM)
Printer memory (SDRAM) for the Optra W810 is available in dual inline memory modules
(DIMMs). The printer ships with either 16MB (soldered on the system board) or 32MB
(16MB soldered on the system board and 16MB installed in one of the memory connec-
tors) of standard memory, depending on the printer model. To install the maximum mem-
ory supported (384MB), you must install a 128MB DIMM in each of the three memory
connectors on the system board. Refer to the
Setup Guide for instructions on installing
memory.
Optra W810 memory specifications
Memory Optra W810 Optra W810n Optra W810dn
Standard memory 16MB 16MB 32MB
Memory type SDRAM SDRAM SDRAM
Additional memory
connectors
332
Note:
A 16MB DIMM
is installed in one of
the three connectors.
Optional memory 4MB, 8MB, 16MB,
32MB, 64MB, 128MB
4MB, 8MB, 16MB,
32MB, 64MB, 128MB
4MB, 8MB, 16MB,
32MB, 64MB, 128MB