Changing printer settings
27
2
Changing
printer settings
This chapter contains details about the printer settings you can change to control printer
functions. To make it easy for you to find the information you need, this chapter is orga-
nized according to the structure of the printer operator panel menus. However, you can
also change many of these settings from your software application, from a Lexmark
printer driver, or using the MarkVision printer utility.
If there is a printer feature you cannot control from the application or printer driver, use the
printer operator panel or the remote operator panel available through MarkVision. Keep in
mind, however, that changing a printer setting from the operator panel or from MarkVision
makes that setting the user default for all subsequent jobs sent to the printer. In most
cases, settings you change from the application or driver apply only to the job you are
preparing to send to the printer.
For information on using the operator panel buttons, continue with “Using the operator
panel” on page 28.” For detailed information on operator panel menus and printer set-
tings, see “Printer menus” on page 32.
To Next Page
Loading...
