Lexmark Optra W810 - Parallel Menu

Changing printer settings
68
Parallel Menu
Use the Parallel Menu to change settings affecting jobs sent to the printer through the
parallel interface connection. You must first select either Std Parallel or Parallel Opt
x
before selecting from the following menu items.
Parallel Menu
Menu item Printer setting
PCL SmartSwitch = Off
= On*
If PCL SmartSwitch is set to On, the printer examines the data
on the parallel interface connection and selects PCL emulation
if the data indicates that is the printer language.
If both PCL SmartSwitch and PS SmartSwitch are set to Off,
the printer uses the language specified in the Printer Language
menu as the default. If only one SmartSwitch setting is set to
On, the printer uses that language as the default.
PS SmartSwitch = Off
= On*
If PS SmartSwitch is set to On, the printer examines the data on
the parallel interface connection and selects PostScript
emulation if the data indicates that is the printer language.
If both PCL SmartSwitch and PS SmartSwitch are set to Off,
the printer uses the language specified in the Printer Language
menu as the default. If only one SmartSwitch setting is set to
On, the printer uses that language as the default.
* Factory default