Changing printer settings
88
Fax Menu
Use the Fax Menu to change settings affecting fax data received by the printer through
the serial interface port. The printer only displays the Fax Menu when a serial interface
port exists on the printer.
Fax Menu
Menu item Printer setting
Fax Port = Disabled*
= Ser Option
x
Select Ser Option
x
to activate the serial port on the tri-port card
and configure it to receive fax data.
If you select Disabled, all of the other menu items in the Fax
Menu are not available.
Fax Baud = 1200
= 2400
= 4800
= 9600
= 19200*
= 38400
= 57600
= 115200
This setting lets you select the rate at which fax data is being
sent to or from your computer.
Refer to the
Technical Reference
for information about the
range of baud values.
Fax Data Bits = 7
= 8*
This setting lets you select the number of fax data bits that are
sent in each transmission frame.
Refer to the
Technical Reference
for more information about
data bits.
* Factory default
To Next Page
Loading...
