Changing printer settings
67
PostScript Menu
Use the PostScript Menu to change settings that only affect printed jobs using the Post-
Script emulation printer language.
PostScript Menu
Menu item Printer setting
Print PS Error = Off*
= On
Select On to print PostScript emulation errors. If an error
occurs, the job stops processing, the error message prints, and
the printer discards the job.
If Print PS Error is set to Off and an error occurs, the job is
discarded but no error message prints.
Font Priority
Note:
Font Priority is only
displayed when a formatted
flash or disk option is installed,
is neither defective, Read/
Write nor Write protected, and
Job Buffer Size is not set to
100%.
= Resident*
= Flash/Disk
Use the Font Priority setting to establish the font search order.
Select Resident to search the printer’s internal memory for the
requested font before searching flash memory or a disk option.
Select Flash/Disk to search the disk option, if installed, and then
search flash memory before searching for the requested font in
printer memory.
* Factory default
To Next Page
Loading...
