Changing printer settings
66
Tray Renumber
(continued)
The Tray Renumber menu item lets you configure your printer
to work with printer drivers or applications that use different
source assignments to request a given input source.
Select Off to use the factory default paper source assignments.
Select a numeric value (0…199) to assign a custom value to a
paper source.
Select None if you want the paper source to ignore the Select
Paper Feed command.
Select VIEW FACTORY DEF to view the factory default values
assigned to each paper source. All sources are displayed in the
VIEW FACTORY DEF menu, even if the printer does not
support that source in any configuration.
In the Restore Defaults menu item, select Yes to return all tray
assignments to factory default values.
See “Paper sources” on page 95 for information on available
paper sources for your printer.
Refer to the
Technical Reference
for more information about
assigning source numbers.
Auto CR after LF = Off*
= On
The Auto CR after LF setting determines whether the printer
automatically performs a carriage return after a line feed control
command.
Auto LF after CR = Off*
= On
The Auto LF after CR setting determines whether the printer
automatically performs a line feed after a carriage return control
command.
PCL Emul Menu (continued)
Menu item Printer setting
* Factory default
To Next Page
Loading...
