Connectivity and network management
207
The IBM host software requirements for AFP/IPDS printing when the printer is emulating
an IBM 381x, 43xx, 311x, or 4028 printer are:
•
AS/400 PSF/400 V3R2, V3R1, V3R6, V3R7, V4R1, V4R2, V4R3 or later
•
AS/400 OS/400 V3R2, V3R1
•
AS/400 OS/400 V3R6, V3R7, V4R1, V4R2, V4R3 or later
•
AS/400 OS/400 V3R6 with System Support Program (SSP) Release 7.5
(Requires IPDS Advanced Function PRPQ if you are using the SIMM for IPDS.)
•
AS/400 SSP Release 7.1 (Requires IPDS Advanced Function PRPQ if you are
using the SIMM for IPDS.)
Direct coaxial attachment
When the printer contains the SIMM for IPDS and the Coax/Twinax Adapter for SCS with
a coaxial cable, the printer attaches to the following IBM hardware:
•
IBM 3174 Control Unit
•
ES/9000 Workstation Subsystem Controller
•
IBM 3174 compatible control units
The IBM host software requirement for AFP/IPDS printing when the printer is emulating
an IBM 381x, 43xx, 311x, or 4028 printer is any application or host software that gener-
ates the AFP/IPDS data stream for one of the emulated printers, such as:
•
PSF/MVS V2.2 or later
•
PSF/VSE V2.2.1, V2.2.0
•
PSF/VM V2.1.1, V2.1.0 (with maintenance)
•
VTAM Printer Support R70 or later (VPS - Levi, Ray & Shoup [LRS] software)
•
GDDM V2.3 with Authorized Program Analysis Reports (APARs)
•
RSCS V3.2 or later
ImageQuick TIFF SIMM
Lexmark ImageQuick™ is an optional SIMM that prints TIFF images on Optra W810
printers at the printer rated speed. With the ImageQuick TIFF SIMM installed in the
optional firmware SIMM connector, the printer automatically prints raw TIFF files in addi-
tion to any standard PCL emulation or PostScript emulation print jobs.
To Next Page
Loading...
