Paper handling
104
The following table outlines the output capabilities for the Optra W810 printer.
Paper sizes supported
The Optra W810 supports a wide variety of paper sizes. Some paper sizes feed from the
trays short edge first, and others feed long edge first. (The leading edge of each sheet is
at the right side of the tray.) This affects the print speed, as well as the proper positioning
of letterhead in the tray.
Output location sensing capabilities
Output
location
Supported
media sizes
Paper
capacity¹
Empty
sensor
Not full
sensor
Full
sensor
Hole
punch
Staple Offset
Standard
bin²
A3, A4, A5,
B4, B5,
executive,
letter, legal,
Universal,
11x17
300
sheets
No Yes Yes No No No
10-Bin
mailbox,
bin 1
A3, A4, A5,
B4, B5,
executive,
letter, legal,
Universal,
11x17
200
sheets
Yes Yes Yes No No No
10-Bin
mailbox,
bins 2–9
A3, A4, B4,
letter, legal,
11x17
200
sheets
per bin
Yes Yes Ye s No No No
2500-Sheet
finisher, bin 1
A3, A4, A5,
B4, B5,
executive,
letter, legal,
Universal,
11x17
500
sheets
Yes Yes Ye s Yes N o No
2500-Sheet
finisher, bin 2
(finisher bin)
A3, A4, B4,
B5, letter,
legal,11x17
2000
sheets
Yes Yes Ye s Yes Ye s Yes
¹ Assuming 20 lb. A4/letter paper.
² The standard bin is not available when either an optional mailbox or optional finisher is
attached to the Optra W810.
To Next Page
Loading...
