Changing printer settings
82
LocalTalk Menu
Use the LocalTalk Menu to change settings affecting jobs sent to the printer through the
LocalTalk port on the tri-port card.
Max Baud Rate = 2400
= 9600
= 19200
= 38400
= 57600
= 115200
= 576000
= 1152000*
= 4000000
The maximum baud rate possible for both the printer and the
infrared adapter is automatically set during a power on reset.
However, if your printer is situated in a bright or highly reflective
environment, you may experience intermittent communication
problems. If you do, select a lower baud rate for the infrared
connection.
LocalTalk Menu
Menu item Printer setting
LocalTalk Port = Disabled*
= LTalk Option
x
Select LTalk Option x to activate the LocalTalk port on the
tri-port card.
If you select Disabled, all of the other menu items in the
LocalTalk Menu are not available.
* Factory default
Infrared Menu (continued)
Menu item Printer setting
* Factory default
To Next Page
Loading...
