Connectivity and network management
206
Compatibility
Direct network attachment
When the printer contains an optional SIMM for IPDS, it attaches to a network using one
of the following MarkNet print servers:
•
MarkNet N2000 Series (Any microcode level is supported for the MarkNet
N2000.)
•
MarkNet S (Microcode level 1.6.5 or later is required.)
•
MarkNet Pro (Microcode level 2.9.15 or later is required.)
The IBM host software requirements for AFP/IPDS printing when the printer is emulating
an IBM 381x, 43xx, 311x, or 4028 printer are:
•
Print Services Facility (PSF)/MVS version 2.2 or later
•
Application System (AS)/400 Operating System (OS)/400 V3R2, V3R1, V3R6,
V3R7, V4R1, V4R2, V4R3 or later through PSF/400
Note:
With AS/400 OS/400 V3R1 or OS/400 V3R6, to print IPDS over TCP/IP
through PSF/400, PTF SF29249 - WRKAFP2 is required.
•
PSF for OS/2 (PSF/2) 2.0 or later
•
PSF for AIX (PSF/6000) 2.1 or later
Direct twinaxial attachment
When the printer contains an optional SIMM for IPDS and the Coax/Twinax Adapter for
SCS with a twinaxial cable, the printer attaches to the following IBM hardware:
•
AS/400e servers and e-systems
•
AS/400 Twinaxial Workstation Controllers
•
AS/400 Advanced System/36 Twinaxial Workstation Controller
•
5494 Remote Control Unit
•
5394 Remote Control Unit
Note:
Two separate twinax addresses, one for the SCS adapter and another for
the SIMM for IPDS, are required.
To Next Page
Loading...
