Paper handling
106
Note:
To change the size of the print material you are using, choose Paper Size
from the Paper Menu. If you use a paper size not listed, select the next
larger size in the Paper Size menu item. See “Changing printer settings” on
page 27 for more information about changing Paper Size.
Universal paper size
Select the Universal paper size to print on a nonstandard size sheet of print material. The
printer formats the page for the maximum size 297 x 420 mm (11.7 x 16.54 in.)
or
279.4 x 431.8 mm (11 x 17 in.). Set the actual size from your software application.
Note:
Trays 1, 2, and 3 support the Universal paper size. However, notches in the
back of the trays prevent loading paper equal to the maximum Universal
dimensions in both width and length.
If you’ve attached an optional finisher to your printer, do not print Universal size paper to
bin 2. Doing so may cause paper jams.
Universal
Note:
Certain
restrictions apply.
Maximum sizes are
297 x 420 mm
(11.7 x 16.54 in.)
or
279.4 x 431.8 mm
(11 x 17 in.).
The printer
formats pages for
215.9 x 355.6 mm
(8.5 x 14 in.)
unless specified
otherwise in the
software
application.
Reverse portrait,
short-edge feed
Dependent upon
paper size
NA
11x17 279.4 x 431.8 mm
(11 x 17 in.)
Reverse portrait,
short-edge feed
19 11.7
Feed orientation by paper size
Paper size
name
Dimensions Feed orientation
Print speed
(ppm)
Print speed
(ppm)
duplex mode
To Next Page
Loading...
