Managing memory
179
37 Insufficient
Memory
Held Jobs may be
lost. Go/Stop?
The printer memory is too full to continue processing print jobs.
The messages
37 Insufficient Memory
and
Held Jobs may be
lost. Go/Stop?
alternate on the display until you do one of the
following:
• Press
Go
to clear the messages and continue printing the job.
The printer frees memory by deleting the oldest held job and
continues deleting held jobs until there is enough printer
memory to process the job.
• Press
Stop
to clear the messages without deleting any held
jobs. Some data in the current job may not print or may not
print correctly.
• Cancel the current job. Press
Menu>
or
<Menu
. The Job
Menu is displayed. Press
Menu>
or
<Menu
until
Cancel Job
appears on the second line of the operator panel display.
Press
Select
.
38 Memory Full
The printer is processing data, but the memory used to store
pages is full.
• Press
Go
to clear the message and continue printing the job.
Some data may not print or may not print correctly.
• Cancel the current job. Press
Menu>
or
<Menu
. The Job
Menu is displayed. Press
Menu>
or
<Menu
until
Cancel Job
appears on the second line of the operator panel display.
Press
Select
.
To simplify the print job:
• Reduce the amount of text or graphics on a page.
• Delete unnecessary downloaded fonts or macros.
Install additional printer memory to avoid future
38 Memory Full
errors.
Memory error messages (continued)
Message Explanation
To Next Page
Loading...
