Connectivity and network management
188
The following table provides more information about the MarkNet internal print servers
and their topologies
.
Periodically Lexmark releases updates to the firmware which may provide new functions
or support for new network protocols. Update the firmware at any time by
flashing
, or
reprogramming, the flash memory in the adapter. Simply download the most current flash
files from the Lexmark Web site (www.lexmark.com) free of charge. Use FTP commands
or MarkVision to flash the print server. Refer to the documentation that came with your
print server for more information on flashing.
For information about installing internal print servers and tri-port cards, refer to the
Setup
Guide
. For information about setting up a printer for a particular network, refer to the
Driv-
ers, MarkVision and Utilities
CD that ships with the printer.
MarkNet N2000 Series of internal print servers
Adapter Topology
N2000t Token-Ring RJ-45 UTP
Token-Ring DB9 STP
N2001e Ethernet 10BaseT/100BaseTX RJ-45 UTP
N2002e Ethernet 10BaseT RJ-45 UTP
Ethernet 10Base2 BNC thin coax
N2501e Ethernet 10BaseT/100BaseTX RJ-45 UTP
SCSI interface
Modem
Note:
This option is only available with the OptraImage
package.
MarkNet S internal print servers
Adapter Topology
MarkNet S Ethernet 10Base2/T Ethernet 10BaseT RJ-45 UTP
Ethernet 10Base2 BNC thin coax
MarkNet S 10BaseT/100BaseTX Ethernet 10BaseT/100baseTX RJ-45 UTP
MarkNet S Token-Ring 16/4MBps 16/4 Token-Ring—9-pin D-shell STP connector and RJ-45
UTP connector
To Next Page
Loading...
