Changing printer settings
34
Paper Size
(continued)
Tray 4 Size (2500-sheet drawer)
= A4* (Country specific)
= Letter* (Country specific)
The Paper Size setting identifies the default formatting size for
each paper source.
Note:
Only installed paper sources are displayed.
The 500-sheet trays and the optional 2500-sheet tray have size
sensing. This means the printer automatically determines the
size of print material loaded in these paper sources. You must
set the paper size for the 250-sheet drawer (tray 1) from the
operator panel. See “Size sensing” on page 107 for more
information.
Note:
Before loading print material in any paper source, make
sure you set the Paper Size for tray 1 and the Paper Type for all
paper sources. Also, select the paper size and the type from
your software application for the print material you are loading.
Select Universal when you load print material that doesn’t
match any of the other available sizes. The printer automatically
formats the page for the maximum possible size. You can then
set the actual page size from your application software.
Paper Type Tray 1 Type
Tray 2 Type
Tray 3 Type
Tray 4 Type
= Plain Paper
= Card Stock
= Transparency
= Labels
= Bond
= Letterhead
= Preprinted
= Colored Paper
= Custom Type
x
Paper Menu (continued)
Menu item Printer setting
* Factory default
To Next Page
Loading...
