Changing printer settings
37
Configure Bins
Note:
Configure Bins is only
displayed when either an
optional mailbox or optional
finisher is installed.
= Mailbox*
= Link
= Mail Overflow
= Type Assignment
Select Mailbox to send print jobs to a specific output bin.
Printed material is placed in the output bin you select when you
send a print job. If you do not specify an output bin, the printed
material goes to the default output bin. When an output bin is
full,
Remove Paper
is displayed and the printer stops printing
until the printed material is removed from the output bin.
Select Link to link two or more bins together as though they
were one large bin. The printer fills the default bin first. When it
is full, the printer starts filling the next output bin. As each
additional output bin is filled, the printer switches to the next bin.
When the default bin and all the linked bins are full, the
Remove
Paper All Output Bins
message appears.
Select Mail Overflow to send print jobs to a specific output bin
while specifying another output bin as an overflow bin. See
“Overflow Bin” for information on Mail Overflow.
Select Type Assignment to send print jobs to an output bin
based on the paper type of the printed media. For information
on Type Assignment, see “Assign Type/Bin” on page 38.
Overflow Bin
Note:
Overflow Bin is only
displayed when Configure
Bins is set to Mail Overflow.
= Bin 1*
= Bin 2
= Bin 3
= Bin 4
= Bin 5
= Bin 6
= Bin 7
= Bin 8
= Bin 9
= Bin 10
Paper Menu (continued)
Menu item Printer setting
* Factory default
To Next Page
Loading...
