Changing printer settings
39
Assign Type/Bin
(continued)
Use the Assign Type/Bin setting to send print jobs to any output
bin based on the paper type of the printed media. Each paper
type is assigned to a specific output bin.
Note:
Only installed bins are displayed.
If a user-defined name is available, it is displayed instead of
Custom
x
Bin. The name is truncated to 14 characters.
Note:
If two or more bins share the same name, the name only
appears once in the Assign Type/Bin value list.
Substitute Size = Off
= Letter/A4
= 11x17/A3
= All Listed*
Select Letter/A4 to automatically print A4 size jobs on letter size
paper and letter size jobs on A4 size paper, if the requested
size is not currently installed in the paper source.
Select 11x17/A3 to automatically print A3 size jobs on 11x17
size paper and 11x17 size jobs on A3 size paper, if the
requested size is not currently installed in the paper source.
Select All Listed to substitute sizes in both cases.
If you do not want the printer to substitute sizes automatically,
select Off. You are prompted to load the requested paper size if
it is not installed.
Paper Menu (continued)
Menu item Printer setting
* Factory default
To Next Page
Loading...
