Changing printer settings
42
Separator Sheets = None*
= Between Copies
= Between Jobs
= Between Pages
You can have the printer insert blank separator sheets between
jobs, between multiple copies of a job, or between each page of
a job. The printer pulls separator sheets from the source
specified in the Separator Source menu item.
Select Between Copies for multi-copy jobs. If Collation is set to
Off, a blank page is inserted between sets of each printed page.
If Collation is set to On, a blank page is inserted between each
copy of the job.
Select Between Jobs to insert a blank page after each print job.
This may be helpful when several people are using the printer.
Select Between Pages to insert a blank page between each
page of a job. This is useful if you are printing transparencies
and want to reduce static build-up when stacking transpar-
encies in the output bin.
Separator Source = Tray 1*
= Tray 2
= Tray 3
= Tray 4
If you are using separator sheets, the Separator Source setting
lets you specify the paper source that holds separator sheets.
Note:
Only installed paper sources are displayed.
Finishing Menu (continued)
Menu item Printer setting
* Factory default
To Next Page
Loading...
