Changing printer settings
54
Reset Printer Press
Select
to reset the printer.
When you select Reset Printer, the printer resets to the user
default setting for each menu item. All downloaded resources
(fonts, macros, and symbol sets) in printer memory (RAM) are
deleted. All data on the currently selected host interface is
deleted from the interface link buffer.
Note:
Before selecting Reset Printer, exit the software appli-
cation you are using.
Print Buffer Press
Select
to print any data stored in the print buffer.
This menu item is only available when you enter the Job Menu
while
Waiting
is displayed. The Waiting state occurs if an
incomplete job is sent to the printer or an ASCII job, such as a
print screen command, is printing.
Prime Stapler
Note:
Prime Stapler is only
displayed when a finisher
option is installed.
Press
Select
to prime the stapler.
After clearing a staple jam, prime the stapler to ensure the
stapler is functioning properly. The printer displays
Priming
Stapler
and staples several staples into a sheet of paper.
Job Menu (continued)
Menu item Printer setting
* Factory default
To Next Page
Loading...
