Changing printer settings
91
Fax Paper Type
(continued)
Custom Type
x
(where
x
represents 1 through 6) refers to
special types of print materials. You can change the names
through a utility such as MarkVision. The user-defined name is
truncated to 14 characters. See “Custom Types” on page 36.
Fax Output Bin = Bin 1*
= Bin 2
= Bin 3
= Bin 4
= Bin 5
= Bin 6
= Bin 7
= Bin 8
= Bin 9
= Bin 10
The Fax Output Bin setting specifies the default exit for
incoming faxes. The available output bins are represented by
numbers. Since the Standard bin is not available when either
the mailbox or finisher is installed, that bin will never be listed in
this menu item.
Note:
Only installed bins are displayed.
If a user-defined name is available, it is displayed instead of
Bin x. The name is truncated to 14 characters. If multiple output
bins are assigned the same name, the name only appears once
in the Fax Output Bin value list.
If two or more bins share the same name, the name only
appears once in the Fax Output Bin value list.
Fax Menu (continued)
Menu item Printer setting
* Factory default
To Next Page
Loading...
