241
70
Parallel Menu
Use the Parallel Menu to change printer settings affecting jobs sent to the printer through a parallel
port (either Std Parallel or Parallel Opt <x>).
Select a menu item for more details:
Note: Values marked by an asterisk are the factory default settings.
Advanced Status
Purpose:
To enable bidirectional communication through the parallel port.
Values:
• Advanced Status • Parallel Mode 1
• Honor Init • Parallel Mode 2
• Job Buffering • PCL SmartSwitch
• MAC Binary PS • Protocol
• NPA Mode • PS SmartSwitch
• Parallel Buffer
Off Disables parallel port negotiation.
On* Enables bidirectional communication through the parallel interface.
To Next Page
Loading...
