296
Restoring Factory
Defaults
What this message means:
The printer is restoring the factory default printer settings. When factory default settings are
restored:
• All downloaded resources (fonts, macros, symbol sets) in the printer memory are deleted.
• All menu settings return to the factory default setting
except
:
– The Display Language setting in the Setup Menu.
– All settings in the Parallel Menu, Serial Menu, Network Menu, Infrared Menu, LocalTalk
Menu, and USB Menu.
What you can do:
Wait for the message to clear.
See also:
Restoring factory default settings
Restoring
Held Job xxx/yyy
What this message means:
The printer is restoring held jobs from the hard disk to printer memory.
Note: xxx represents the number of the job being restored currently.
yyy represents the total number of jobs to be restored.
What you can do:
•
Wait for the message to clear.
• Select the Abort Restore menu item in the Job Menu.
See also:
Using the Print and Hold function; Abort Restore
To Next Page
Loading...
