Repair information 4-31
7011-2xx / 3xx
10.Rotate the power supply assembly so the remaining cables can be removed.
11.Remove the LVPS/HVPS card and cover.
LVPS/HVPS to controller card cable removal
Note: Use the cable in part number 40X6113 machines with a serial number greater than 5920000.
1. Remove the LVPS/HVPS card. See “LVPS/HVPS card assembly removal” on page 4-29 for more
information.
2. Remove the controller card cover. See “Controller card removal” on page 4-13 for more information.
3. Unplug the cable at J22 on the controller card, and extract the cable.
Note: The card may not have to be completely removed to disconnect the cable.
To Next Page
Loading...
