4-38 Service Manual
7011-2xx / 3xx
Printhead removal
Note: Use part number 40X5776 for printers with serial number 5920000 or greater.
1. Remove the flatbed and ADF. See “Flatbed removal” on page 4-48, and “ADF assembly removal” on
page 4-46.
2. Remove the top cover. See “Top cover removal” on page 4-8 for more information.
3. Remove the toroid from the group of cables at the top of the controller card.
4. Unplug the printhead cables at locations J12 and J13 on the controller card and on the printhead.
To Next Page
Loading...
