Lexmark X203N - Understanding Scan Profile Options

Diagnostic aids 3-3
7011-2xx / 3xx
Registration
Printer
Print registration makes sure the black printing is properly positioned on the page.
To set print registration:
1. Select REGISTRATION from the DIAGNOSTICS menu.
2. Use or to select Quick Test, and press . See “Quick test” on page 3-4.
The message Quick Test Printing… appears on the display, and the page prints.
Retain this page to determine the changes you need to make to the margin setting’s.
3. Use or to select the margin setting you need to change, and press .
4. Use to decrease or to increase the offset values, and press to confirm the value.
The message Submitting changes displays, and the original margin setting screen appears.
The print registration ranges are:
Transfer Adjust See “Transfer” on page 3-9.
Print Contrast See “Print contrast” on page 3-9.
Charge Roll See “Charge Roll” on page 3-9.
Gap Adjust See “Gap Adjust” on page 3-10
Auto Dark Adj See “Auto Dark Adjust” on page 3-10.
REPORTS
Main setting’s Page See “Main setting’s Page” on page 3-10.
EVENT LOG
Display Log See “Display Log” on page 3-10.
Print Log See “Print Log” on page 3-10.
Clear Log See “Clear Log” on page 3-11.
Development Menu
Scanner Tests
ASIC Test See “ASIC Test” on page 3-11.
Feed test See “Feed Test” on page 3-11.
Scanner sensor tests See “Sensor Test” on page 3-12.
EXIT DIAGNOSTICS This selection exits Diagnostics mode, and Resetting the Printer
displays. The printer performs a POR, and returns to normal mode.
Description Value Direction of change
Top margin -50 to +50
Each increment corresponds to 8
scans at a 600 dpi scan rate (0.0133
inches or 0.339 mm)
.
The default is 0.
A positive change moves the image down the
page and increases the top margin. A negative
change moves the image up and decreases
the top margin. No compression or expansion
occurs.
Bottom margin -25 to +25
Each increment causes
approximately 0.55 mm shift in the
bottom margin.
The default is 0.
A positive offset moves text down the page and
narrows the bottom margin, while a negative
offset moves text up the page and narrows the
bottom margin. The image is compressed or
expanded.
Diagnostics mode tests (Continued)