Lexmark X203N - Solving Copy Problems; Troubleshooting Unresponsive Copier Function; Troubleshooting Scanner Unit Not Closing

Repair information 4-33
7011-2xx / 3xx
Operator panel bezel removal
1. Remove the front flatbed cover See.“Flatbed front cover removal” on page 4-9.
2. Gently pry the bezel away from the operator panel, starting at one of the front corners and working across
the bezel.
3. Remove the bezel from the MFP.
Operator panel cable removal
1. Remove right cover.
2. Remove operator panel.
3. Disconnect the operator panel cable from the controller card.