Lexmark XC9235 - Page 116

Menu item Description
Output Bin
Standard Bin
Specify the output bin for received faxes.
Fax Footer
On
O*
Print the transmission information at the bottom of each page from a received
fax.
Fax Footer Time Stamp
Receive*
Print
Print the time stamp at the bottom of each page from a received fax.
Punch
O*
2 holes
3 holes
4 holes
Punch holes along the edge of the printed fax document.
Note: This menu item appears only when a multiposition staple, hole punch
finisher is installed.
Staple
O*
1 staple
2 staples
Staple the printed fax document.
Note: This menu item appears only when a finisher is installed.
Holding Faxes
Held Fax Mode
O*
Always On
Manual
Scheduled
Hold received faxes from printing until they are released.
Note: An asterisk (*) next to a value indicates the factory default setting.
Admin Controls
Menu item Description
Enable Fax Receive
On*
O
Set the printer to receive fax.
Enable Color Fax Receive
On*
O
Set the printer to receive fax in color.
Enable Caller ID
On*
O
Show the number that is sending the incoming fax.
Block No Name Fax
On
O*
Block incoming faxes sent from devices with no station ID or fax ID specified.
Note: An asterisk (*) next to a value indicates the factory default setting.
Understanding the printer menus 116