3 Flex, fan, and align the paper edges before loading.
4 Load the paper or specialty media.
When using letterhead, do either of the following:
One‑sided printing Two‑sided printing
Warning—Potential Damage: When using envelopes, do not use envelopes with stamps, clasps, snaps,
windows, coated linings, or self‑stick adhesives.
5 From the control panel, set the paper size and paper type to match the paper loaded.
Linking trays
1 From the home screen, touch Settings > Paper > Tray Configuration > select a paper source.
2 Set the same paper size and paper type for the trays that you are linking.
3 From the home screen, touch Settings > Device > Maintenance > Config Menu > Tray Configuration >
Tray Linking.
4 Tou ch Automatic.
To unlink trays, make sure that no trays have the same paper size and paper type settings.
Warning—Potential Damage: The temperature of the fuser varies according to the specified paper type. To
avoid printing issues, match the paper type setting in the printer with the paper loaded in the tray.
Loading paper and specialty media 39
To Next Page
Loading...
Need help?
General
