9 Secure the tray to the printer with the locking clips and metal bracket.
• Front
• Rear
10 Close the trays, and then attach the connector cover.
11 Connect the power cord to the printer, and then to the electrical outlet.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord
to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.
12 Turn on the printer.
Add the tray in the print driver to make it available for print jobs. For more information, see
“Adding available
options in the print driver” on page 316.
Upgrading and migrating 290
To Next Page
Loading...
Need help?
General
