■ Handling the driver monitor sensor
Observe the following to ensure the driver monitor sensor can function effectively.
Failure to do so may result in a malfunction or may prevent the system from cor-
rectly determining the direction the driver is facing, resulting in an unexpected
accident.
● Do not disassemble, damage, lift or pull on the sensor.
● Do not select the sensor while driving.
● Do not wet or spill water on the sensor.
● Do not drop anything on or allow anything to hit against the sensor. Do not sub-
ject the sensor to an impact.
● Make sure that there are no scratches, dirt or stickers on the side of the sensor
that faces the driver.
● Do not place any objects in front of the side of the sensor that faces the driver or
cover the sensor.
To Next Page
