348
GS350_OM_OM30D41U_(U)
5-1. Remote Touch screen
■ Voice command system
● Commands that are not displayed in the “Shortcut Menu” screen can be operated
from the “Main Menu” screen.
● If the system does not respond or the confirmation screen does not disappear,
press and try again.
● Voice guidance can be canceled by setting voice prompts to off. Use this setting
when it is desirable to say a command immediately after pressing and hearing
a beep.
■ If a voice command cannot be recognized
● If a voice command cannot be recognized within 6 seconds, voice guidance will
say “Pardon?” (“Command not recognized.” will be displayed on the screen) and
voice command reception will restart.
● If a voice command cannot be recognized 2 consecutive times, the voice com-
mand guidance system will say “Paused. To restart voice recognition, push the talk
switch. To cancel voice recognition, push and hold the talk switch.” Then voice rec-
ognition will be suspended.
■ When selecting “Voice Prompts”
● The voice recognition prompt can be set to on or off. This setting can also be
changed on the “Voice Settings” screen. (P. 336)
● Voice recognition will be temporarily suspended. Press again.
To Next Page
